The Cannabis Fluxing Technique

When you think about cannabis plant training techniques, you probably think of Low Stress Training, topping, and other things. But there is one ancient process you may not be familiar with: fluxing. This approach, developed by a well-known home grower, is creating waves among cannabis farmers due to its capacity to increase yields and cultivate healthy plants. This article will go over all there is to know about cannabis fluxing!

History of fluxing cannabis technique

Many producers employ an eye-catching cannabis growth technique known as “fluxing.” A little study reveals that the fluxing technique was created by a grower named Light Addict. Light Addict has also written a more comprehensive book on the subject, which includes numerous fluxing tips and procedures and a supplementary guide to effective cannabis grafting. In that it creates a plant with a split at the base between two main branches, the procedure is comparable to manifolding. However, the subsequent processes change, and the resultant base is substantially different!

Read more: Mainlining cannabis is a similar technique that involves manifolding.

Additionally, when starting this approach with a regular plant, wait until you reach the third node. The rationale for this is that you want a mature and large node. Then you just micro top at this node, leaving the small node sites on each side of the stem’s heading point. You let the two new development points at the top develop, horizontally training them both.

Understanding cannabis fluxing

Fluxing is the process of spreading the two main stems apart to create a broad and flat plant with many evenly spaced bud sites. The advantage of fluxing over manifolding is that you have total control over the plant’s growth pattern. Each location will have equal light penetration and airflow spacing. Furthermore, every single limb has the same anatomy. This may be a huge benefit! According to Light Addict, “the process is nearly symbiotic in veg since you control every aspect of its development.” The fundamental idea behind fluxing is to top the cannabis plant while it is young, remove all but two significant stems, and secure the two main branches as the plant matures. More topping is employed to make a grid-like manifolding with uniformly spaced colas.

Expert “fluxers” frequently secure plants relatively low to help maintain plants short and neat. Still, it may be simpler for beginner growers to bind your two main stems more loosely and allow the plant to develop reasonably naturally after that. This is also a fantastic choice for cultivating autoflower cannabis seeds, as they have less time to recover from excessive topping and training during the vegetative period. Regardless of how you do it, you have the potential to grow cannabis plants with numerous equally spaced colas!

How and why should you flux cannabis?

Why should you flux your cannabis plants? The solution is straightforward: yield. Fluxing allows your plant to concentrate its energy on each of its branches rather than on a single top. This results in an even canopy with equal amounts of light reaching each branch. Furthermore, fluxing promotes light penetration and airflow from the canopy’s top to bottom. This improves overall plant health and reduces the likelihood of diseases taking root.

Benefits of fluxing cannabis plants

There are various advantages to cannabis fluxing. First and foremost, it can assist you in increasing your yields. It also reduces larfs and other plant waste by equally spreading your plant’s energy. Finally, fluxing is an excellent method for growing tall, lanky plants inside. Because you’re producing so many tops, you can concentrate on developing Sativa outwards rather than upwards.

Cons of fluxing cannabis plants

However, there are a few drawbacks to this cannabis procedure. The most basic of these is effort. It takes a lot more effort to flux your plants than to Sea Of Green or manifold them correctly. Furthermore, you cannot simply utilize any genetics to create cannabis. Photoperiodic plants should be used instead. You can then control when they turn into flowers.

Cannabis fluxing vs manifolding

Fluxing cannabis is ideal for indoor and outdoor gardeners using tiny pots. Allow the cannabis plant to develop to the fifth or sixth node, then prune down to the third node. Everything below the third node has to be cleansed, and just two branches are left to develop. This pair of branches is gradually tied down and lays flat, almost touching the growth medium. Every time a new shoot develops, the two branches are allowed to spread out and are held down. As the young branches increase in length, they are knotted and lowered to lay flat. What you want is a grid configuration with no intersecting branches: effectively, a collection of 90-degree angled branches. The plant is cleansed of all big fan leaves during the growth period and allowed to recuperate. Before flowering, the plant can grow as linearly as you like. As a result, there are several uniformly spaced budding sites. It is better to bend the branches on dry days since they are flexible.

Conversely, manifolding is a growth method that involves constructing the structure of cannabis plants to send nutrients to blooming locations. Because it is a rigorous training approach, it might not be exceptionally comforting for a newbie. You must develop the cannabis plant to the fifth or sixth node before being topped down to the third node. All growth below the third node is eliminated.

Required cannabis fluxing equipment

1. Green twist tie – You’ll need a lot of green twist-tie if you want to follow Light Addict’s fluxing approach. You will use this tool to draw a grid over the top of your canopy. Each grid tile receives its own branch.
   
2. Large smart pot – Smart Pots are an excellent choice for trellising with green twist ties. You may then punch holes in the pot. This lets you immediately attach a green twist tie to your Smart Pot. Because fluxing cannabis necessitates large plants, a 10-gallon pot is recommended.
   
3. Trellis netting – What if you don’t want to create your own trellis out of green twist ties? Fortunately, there is a remedy! You may buy ready-made trellis netting that works just as well. Just make sure it’s securely fastened to your smart pot!
   
4. HPS grow lamps – Light Addict utilized CFL grow lamps when he initially wrote his guide on flux training cannabis. He argues that in retrospect, he would have chosen HPS lighting. These lights provide more power per watt to supercharge your plants despite using more electricity.

A step-by-step fluxing cannabis procedure

1. Top your plant once it has developed its third node to begin fluxing. This will result in two new top colas, each getting equal energy.
   
2. Allow at least three days for your plant to recuperate after topping. Then, move it to the huge smart pot. Once there, use green twist ties to secure each top. Install the trellis wire and tuck your tops beneath it if you’re utilizing trellising for fluxing.
   
3. Each of your main tops will have sprouted numerous additional nodes within a week or two. You should remove every other node on each branch. Then, arrange green twist ties in a grid to secure each new bud location. They will eventually turn upwards as they grow into their own tops.
   
4. After another 3-5 days, connect each new top to a twist tie individually. Connect the opposite end of the twist tie to the smart pot’s rim.
   
5. You have practically done fluxing at this stage! Allow at least a week before changing into a bloom. Allow your plant to develop organically, and keep an eye out for any issues that arise throughout the flowering cannabis stage.

Essential tips before you start fluxing cannabis

It’s critical to remember to start fluxing when your plant is still young. You should begin the manifolding procedure in week 3 or 4. Here’s another helpful hint for early fluxing. During the majority of veg, keep your plant under 24-hour light. According to Light Addict, a plant kept under constant light for 24 hours would stretch harder during the first two weeks of flowering than a plant kept under 16 or 18 hours of light. Finally, avoid wrapping your green twist ties too tightly around your branches! Allow your plant to develop. You don’t want to cut off the flow of nutrients through its vascular system!

While many growers are unfamiliar with the fluxing process, it has been around for quite some time. In reality, you may trace the process back to 2014. Everything began with a grower dubbed Light Addict. He started by making a grid out of green twist ties and fluxing a single plant. To cut a long tale short, it worked. Light Addict’s approach was much praised online. The approach gave him such power that he released a book outlining the fluxing procedure and other growth techniques. Be patient if you want to experiment with fluxing cannabis for yourself. Keep in mind that this is an advanced method. It takes time and effort to use fluxing properly in your garden. But if you can pull it off, you will be ecstatic at cannabis harvest time.